How to Fix Xbox One Controller- Solutions

How to Fix Xbox One Controller

Nothing takes you out of the game than an Xbox One Controller that won’t turn on. We will tell you different ways o how to fix Xbox One Controller. Even though it is a pretty sturdy gaming console, it can breakdown and give you trouble for a number of reasons.

The Xbox One Wireless Controller is the primary controller for the Microsoft Xbox One console. The controller maintains the overall layout found in the Xbox 360 controller, but with various tweaks to its design, such as a revised shape, redesigned analogue sticks, shoulder buttons, and triggers, along with new vibrators within the triggers to allow for directional haptic feedback.

There are a lot of different reasons why your Xbox One Controller won’t connect, some of the major ones are mentioned below and you can use this and know how to fix Xbox One Controller,

Also Read: How to Fix a Slow Computer [9 Best Ways]

1. Check Common Issues

There are a few common issues listed below that you should check before diving into the troubleshooting steps of how to fix Xbox One Controller,

The battery terminals in an Xbox One controller.

Here are the most common problems that keep an Xbox One Controller from powering up,

  • Batteries- Most of the issues related to non-working of Xbox One Controller are battery related and thus can be tackled easily. If the batteries are worn out or in need of a charge, it won’t turn on. It also won’t turn on if the batteries are installed improperly.
  • Battery contacts: The controller won’t turn on if the battery contacts are worn out or bent too much. It also won’t turn on if the batteries don’t make firm contact for any other reason.
  • Charging cable problems: If you use a charge and play kit to charge the controller, the cable may be bad. These cables fail internally, so you can’t necessarily tell it’s bad only by looking at it.
  • Firmware problems: A controller may fail to turn on again when a controller firmware update is interrupted.
  • Internal faults: Sometimes, something is physically broken inside the controller that prevents it from turning on.

These are some of the simpler problems that can help you in the process of how to fix Xbox One Controller. Now we will discuss some of the troubleshooting problems.

2. How to Fix Xbox One Controller if it is not Connecting.

Sometimes, the Xbox One Controller just won’t connect to the gaming console and this is a big problem. There are a few possible reasons as to why this might happen,

Low Batteries

Your batteries may be low. If the batteries are low, the controller’s wireless signal strength may be weak and therefore will not connect to the console. You are going to want to replace your batteries or charge the controller. No tools are required for this process.

Another Wireless Device Is Interfering

A conflicting signal may be responsible for connectivity issues. Consider turning off nearby wireless devices and reconnecting the controller.

Too Many Controllers Are Connected

Make sure you do not have more than eight controllers connected. That is the limit for the Xbox One console.

Controller Inactivity

If you set down your controller for longer than fifteen minutes and then come back to an unresponsive controller, you may need to turn the controller back on.

Controller Is Out Of Range

Your Xbox One Controller signal has a range of 30 feet (9.1 meters). Make sure you are within this range.

Controller Is Not Synced

If you sync your controller to another device, you will need to re-sync it back to your console. To do this, turn on the Xbox One and hold down the sync button on your controller. Simultaneously, hold down the sync button on your console until the light on your controller begins to flash at a rapid pace. Once this happens, release both sync buttons. Your controller should now be connected after about five to ten seconds.

Mic Preventing Connection

Some people have reported that the controller will not connect with the headset mic plugged in. Unplug the mic, and reconnect. Sync if necessary. Plug the mic back in after establishing a connection.

Also Read: How to Fix Windows 10 Keyboard Not Working [FIXED]

3. How to Fix Xbox One Controller if it is Blinking

If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn’t paired to a console.There are three different solutions to fix this problem, as listed below,

Pair your controller to your console wirelessly

To stop your Xbox One controller from blinking just press down on the pair button on your Xbox One console and then release it, and within 20 seconds, hold down the corresponding pair button on your controller.

The controller should flash more rapidly for a moment, then display a continuous light. When that happens, it’s paired.

Connect your controller to your console with a micro USB cable

You can also pair your controller with your console by connecting it via a physical micro USB cable.

Restart your console and controller

If pairing your controller doesn’t work, check your controller’s batteries and then shut down your Xbox One Console by holding the power button for 10 seconds. Turn it back on, then try again.

Also Read: How to Allocate More Ram to Minecraft Server

4. How to Fix Xbox One Controller if it Won’t Turn On

All problems aside, how do you fix a controller that won’t even turn on. Don’t worry, we have got you, here is a list of possible reasons and solutions to this.

Low Batteries

Your batteries may be low. If the batteries are low, the controller’s wireless signal strength may be weak and therefore will not connect to the console. You are going to want to charge you batteries. If the batteries will not charge, or drain too quickly, replace your batteries.

Low Battery Pack

Your battery pack may be completely drained. Plug the controller into the console using a USB cord. To check on how charged the battery is, press the Xbox button to go to the home screen where the charge will be displayed in the bottom right corner.

If the pack will not charge, or drains too quickly, you can get replacement battery packs.

Defective Charge Cable

Your charging cable may be defective and will not charge your controller at all. If this is the case, you will need to buy a new cord.

Update the Firmware

Xbox One controllers rely on firmware to work correctly. If it gets corrupted, or an update is interrupted by turning off the console, the controller won’t turn on.

5. How to Fix Xbox One Controller if it has Sticky Buttons

At times, some of the keys don’t pop back on time and take longer than usual to do so. This could be due to,

Dirt Build-Up

There could be minor dirt build up or sugary drink residue within your controller. You’re going to want to see the Buttons Replacement Guide so you can get to get to your buttons to clean them, or replace the covers or gasket.

Also Read: How to Choose the Best External Hard Drive for MacBook

6. How to Fix Xbox One Controller if it won’t Vibrate

The controller can choose not to vibrate during the games and this can be really annoying. This can be due to the following reasons,

Vibration Setting Not Enabled

Make sure your vibrations setting is enabled. This can be done in the settings of the game you are playing.

Low Batteries

If your batteries are low, the controller may not vibrate in an effort to save battery life. Replace the batteries or charge your controller.

Vibration May Not Be Supported By The Game

Try using another controller on the game that you are playing. If the controller is still not vibrating, the game most likely does not support this option.

Vibration Motor is Defective

If you have tried everything above and your controller still refuses to vibrate, there may be something wrong with the vibration motor. Get ready to grab a screw driver, you’re going to need it for the Trigger Rumble Motor Replacement Guide. This guide requires soldering.

If nothing else works, head to Microsoft’s Device Support page. Sign in with your Microsoft account, register your console if you haven’t yet, and you can proceed through the steps to replace your controller. If Microsoft won’t replace it, you should be able to find a deal on a new controller instead.

Hopefully, one of these tips cleared up your Xbox One controller problem. Whether your controller won’t connect, keeps flashing, or won’t turn on, one of these tips should get you back in the game.

We hope this helps you in the steps of how to fix Xbox One Controller.

Happy gaming!

Thanks for Reading :)

Enjoyed this post? Share it on social media!

Leave a Feedback!

How to Fix Xbox One Controller- Solutions

by Mohit Rajora time to read: 6 min
0